Silvercrest SDT 1.7 A1 - Manual (Page 160)

SilverCrest SDT 1.7 A1
158 - English
Inserting the Batteries into the Handset
Open the battery compartment by gently pressing the ribbed area of the battery compartment cover
and then sliding it downwards. Next remove the battery compartment cover. Insert the rechargeable
batteries into the handset [A] as illustrated below. Take care to insert the batteries into the handset [A]
observing the correct polarity (+ and – ). The correct polarity is labelled on the batteries and inside
the battery compartment. Replace the cover to close the battery compartment.
(The figure is representational)
Charging the Batteries
CAUTION! Never place the handset on the base without inserting the battery
compartment cover!
Once the batteries have been inserted in the handset [A], they must be charged using the base [B] for
at least 16 hours before using the handset for the first time. To do so, place the handset [A] with the
display [2] facing forward onto the base [B]. A confirmation beep will sound.
On delivery, the batteries are not charged.