Silvercrest CRB-631 - Manual (Page 19)

Overview of the device - CRB-631
19
En
g
lish
10.4 Removing and attaching the operating panel
Attachment
Carefully place the left-hand side of the operating panel onto the locking pin. Then
gently push the right-hand side onto the locking pin and carefully push the operating
panel upwards until it clicks into place.
Removal
Tilt the operating panel outwards by 45° (1). Carefully push the operating panel to the
left and pull it out towards you.
Caution!!
 Never exert force on the buttons or display when removing or attaching the
operating panel. Protect the operating panel against knocks and theft. Always
place the operating panel in the case provided when it has been removed.
Note:

Never tilt the operating panel outwards completely (90°), as the frame would
then impede its removal.