Silvercrest CRB-631 - Manual (Page 26)

CRB-631 - Basic functions
26
Alphabetical search (Track name)
If the alphabetic search function is selected, the three characters "A**- - - - -" are shown
on the display.
Plus (+) button / minus (-) button (9)
Enter the character.
Tune up button ( ►►▌ ) (13) / Tune down
button ( ▌◄◄ )(11)
Select the next or previous character.
Select button (SEL) (15) The flashing character is confirmed.
Band button (24) Press the Band button twice. Playback
of the entered track is started.
Note:

Characters from "A" to "Z" and the digits "0" to "9" can be entered.
 Repeat this procedure until the required characters are displayed.
 If several files are found, the files can be opened by pressing the Tune up
(►►▌) (13) or Tune down buttons (▌◄◄)(11) and the desired track can be
confirmed by pressing the select button (SEL) (15) .
 If the track is not found, the message "NO MATCH" is displayed, followed by "A
* * - - - - -" . The alphabetical search can then be repeated.
Folder search (only in MP3/SD/USB mode)
When the folder search is selected, "ROOT" is shown on the display.
Tune up button (
►►▌ ) (13) / Tune down
button ( ▌◄◄ )(11)
You can navigate through sub-folders if
these are available.
Band button (24) Open the sub-folder or confirm playback
of the first file of the selected folder.
The device then starts playback of the
track of the selected (sub)folder.
Note:

If no entries are made for 5 seconds, the display returns to the default setting in
the selected mode. If the clock display is enabled, the device displays the clock
in standby mode.