Silvercrest SED 3.7 C2 - Manual (Page 59)

GB
MT
56 SED 3.7 C2
WARNING - PROPERTY DAMAGE!
►
Use the appliance only indoors.
Mains power operation
1) Insert the connector plug of the mains power adapter 8 into the
socket for mains adapter 7 on the appliance. Ensure that the
speed switch 5 is set at “0”.
2) Connect the mains power adapter 8 to a mains power socket.
The control lamp 6 glows red to indicate that the charging
process is active.
The appliance is ready for immediate use.
Battery operation
1) Insert the connector plug of the mains power adapter 8 into the
socket for mains adapter 7 on the appliance. Ensure that the
speed switch 5 is set at “0”.
2) Connect the mains power adapter 8 to a mains power socket.
The control lamp 6 glows red to indicate that the charging
process is active.
As soon as the control lamp 6 glows green the appliance is fully
charged and you can disconnect it from the mains power supply.
NOTICE
► For the initial charging, the appliance requires about
80 minutes to fully charge.
► First recharge the appliance when the control lamps 6 indi-
cate, by alternately fl ashing red and green, that the battery
charge level is low..