Silvercrest SED 3.7 C2 - Manual (Page 64)

61
GB
MT
SED 3.7 C2
Storage
■ Always protect the epilator head 2 with the supplied protective
cap 1.
■ Store the appliance, the cleaning brush 0 and the mains power
adapter 8 in the storage pouch 9.
■ Store the appliance at a dry and dustfree location.
Troubleshooting
Problem Cause Solution
The appliance
does not function.
The battery is
drained. Recharge the
appliance.
The appliance
is defective. In this case, contact
Customer Services.
The appliance
only runs slowly. The battery is
drained. Recharge the
appliance.
The plucking of
the hairs is very
painful.
The hairs may be
too long.
Shorten the hairs to
about 0.3 - 0.5 cm.
See also the section
"Tips and Tricks".
Not all hairs are
plucked.
It is possible that the
hairs are too short.
The hairs should
have a length of
0.3 - 0.5 cm.
You are working
too fast.
Move the appliance
more slowly over your
skin.