Intended use, Items supplied, Appliance overview – Silvercrest SKAD 1000 A1 User Manual

Page 29: Setting up and connecting to the power supply

Advertising
background image

- 27 -

Intended use

The coffee maker is intended exclusively for brewing
coffee. This coffee maker is intended exclusively for
use in domestic households. Pay heed to all of the
information in this operating manual, especially the
safety instructions. All other uses are deemed to be
improper and may result in property damage or
even in personal injury. We shall not accept liability
for damages caused due to improper use of the
appliance.

Items supplied

Coffee machine
Thermos can with lid
Measuring spoon
Operating manual

Appliance overview

1 Water tank lid with integrated handle
2 Water tank
3 Handle of the filter holder lid
4 Filter holder (with filter insert)
5 Aroma selector switch
6 Coffee exit
7 Thermos can lid
8 Thermos can
9 On/Off switch with integrated control lamp
0 Stand plate
q Cable shaft

Setting up and connecting to

the power supply

Risk of electric shock!

Under no circumstances should the appliance be
located close to water, in particular, close to filled
sinks and other waterfilled vessels. Use the coffee
machine only on a thoroughly dry surface. The
proximity of water presents a risk, even when the
appliance is switched off. Accordingly, always
remove the plug from the mains power socket after
use.

Warning in regard to property
damage!

Never locate the coffee machine close to sources of
heat. The appliance could be damaged.

Attention!

To avoid damage to the appliance and the location
area, use the coffee machine only on a flat and
heat-resistant surface.

• Remove all packaging materials from the ap-

pliance.

• Place the appliance on a dry, flat and heat-

resistant surface.

• Place the thermos can 8 on the stand plate 0

in the appliance.

• Then insert the plug into a mains power socket.

IB_67145_SKAD1000A1_LB5 27.06.2011 9:09 Uhr Seite 27

Advertising