Silvercrest SKAD 1000 A1 - Manual (Page 31)

- 29 -
2. Place the water tank 2 on the coffee machine
so that it is firmly seated.
3. Close the water tank lid 1.
Modifying the aroma
• Select the desired coffee strength on the aroma
selector switch 5. The setting is for strong
coffee, the setting is for medium coffee and
the setting is for mild coffee.
Switching On and Off
Note:
Rinse the thermos can 8 with hot water from before
you start the brewing process. This will help the
coffee to stay hot for longer!
• Before you switch the coffee machine on, ensure
that the thermos can 8 is correctly located on
the stand plate 0.
• To switch the coffee machine on, press the On/
Off switch 9. The integrated control lamp 9
glows.
• If you want to cancel a brewing process, press
the On/Off switch 9. The integrated control
lamp 9 extinguishes.
• The coffee machine switches itself off automati-
cally upon completion of the brewing process.
The control lamp 9 integrated in the On/Off
switch 9 extinguishes.
• Remove the plug from the mains power socket
if the coffee machine is no longer to be in use.
Note
You can b brriie effllyy take the thermos can 8 out of the
machine (for max. 30 seconds), for example, if you
want to pour a coffee. Thereby, no coffee will drip
from the machine.
Place the thermos can back on the stand plate 0
within 30 seconds.
Otherwise, the filter will overflow and coffee/water
will drain from the filter holder 4.
Pouring coffee
To pour coffee from the thermos can 8 it is not
necessary to completely unscrew the thermos can
lid 7:
1. Unscrew the thermos can lid 7 so far that the
arrow points to the symbol . With this,
coffee may be poured from the can without
the thermos lid 7 falling off.
2. After pouring, close the thermos can lid 7
immediately. If you do not, the coffee will cool
more quickly.
Note
Should you wish to keep the coffee warm in the
thermos can 8 for an extended period, remove the
thermos can 8 from the coffee maker when the bre-
wing process is finished. When the thermos can 8
is standing in the coffee maker the thermos can lid
7, due to the brewing mechanism, is pressed
down. As soon as the brewing process is complete,
hot air escapes through the thermos can lid 7. The
coffee cools faster. When the thermos can 8 is re-
moved from the coffee maker, the thermos can lid
7 closes itself automatically. The coffee stays hot
for longer.
Note
Wait at least 3 minutes before you start another
brewing process.
IB_67145_SKAD1000A1_LB5 27.06.2011 9:09 Uhr Seite 29