Operation, Before the first use attention, Filling with ground coffee – Silvercrest SKAD 1000 A1 User Manual

Page 30: Attention

Advertising
background image

- 28 -

Operation

Before the first use

Attention!

• NEVER fill the water tank 2 with a total volume

of more than 10 cups of water. NEVER fill the
water tank 2 with less than 2 cups of water.
Otherwise, the coffee machine could be damaged.
Use the scale on the water tank 2.

• Unplug the coffee machine immediately after use.

The appliance is completely free of electrical
power ONLY when it is unplugged.

• Fill the water tank 2 only with freshly drawn

mains water. Using anything else could damage
the appliance.

1. Using the handle integrated into the water tank

lid 1, take the water tank 2 out of the coffee
machine and clean the water tank 2 with water
and some detergent. Afterwards, rinse it out
with lots of clean water, such that all detergent
residues are removed.

2. Clean the thermos can 8 with water and a little

detergent. Afterwards, rinse it out with lots of
clean water, such that all detergent residues are
removed.

3. Pour water into the water tank 2 up to the 8-cup

mark and then place it in the coffee machine
so that it is firmly seated. If you fill it with more
than 8 cups water and brew it without coffee
powder, the thermos can 8 will overflow.

4. Place the empty thermos can 8 on the stand

plate 0 so that the coffee exit 6 is located
centrally above the thermos can lid 7.

5. Press the On/Off switch 9. The integrated

control lamp 9 glows. The brewing process
starts. Wait until the brewing process is com-
plete and the control lamp goes out.

6. Empty the thermos can 8.
7. Wait until the appliance has cooled down.

Subsequently, you can use the coffee machine for
the brewing of ground coffee.

Filling with ground coffee

1. Open the filter holder lid with the grip 3.

The filter element must be inserted.

2. Place a filter bag (size 1 x 4) with folded over

sides in the filter holder.

3. Fill it with the required amount of coffee powder

using the measuring spoon.

Note:

Fill it with about one levelled coffee spoon of
ground coffee per cup of filter coffee. If the filter
coffee should be less strong, you can reduce the
amount of ground coffee per cup.

4. Close the filter holder lid.

Filling with water

Note

Use only freshly drawn mains water for preparing
the coffee!

1. Take the water tank 2 from the coffee machine

and fill it with water as per the desired quantity
of filter coffee. Orient yourself with the scale on
water tank 2.

Attention!

• NEVER fill the water tank 2 with a total volume

of more than 10 cups of water. NEVER fill the
water tank 2 with less than 2 cups of water.
Otherwise, the coffee machine could be damaged.
Use the scale on the water tank 2.

IB_67145_SKAD1000A1_LB5 27.06.2011 9:09 Uhr Seite 28

Advertising