Silvercrest SKF 2300 A1 - Manual (Page 14)

- 12 -
Troubleshooting
If the malfunction cannot be corrected with the following suggestions, or if you have determined that the
malfunction has other causes, please make contact with our Service Centre.
Problem Cause Solution
• The appliance does not func-
tion.
• The control lamp integrated
into the On/Off switch 0
does not glow.
• The appliance is not connected
with a mains power socket.
• Connect the appliance with
a mains power socket.
• The On/Off switch 0 has not
been activated.
• Press the On/Off switch 0.
• The heat protection function
has been activated.
• Allow the appliance to cool
down. Press the reset button e
on the rear of the control and
heating element 5.
• The appliance has switched
itself off during use and does
not allow itself to be switched
back on. • The heat protection function
has been activated.
1. Remove the plug and allow the
appliance to cool down.
2. Press the reset button e on the
rear of the control and heating
element 5.
• The green control lamp does
not glow.
• The programmed temperature
for the cooking oil/fat has not
been reached.
• Wait a few minutes until the
required temperature has been
reached.
IB_66928_SKF2300A1_LB4 29.04.2011 8:37 Uhr Seite 12