Silvercrest SNAW 1000 A1 - Manual (Page 121)

118
GB
MT
SNAW 1000 A1
Operation
Weighing items
1) Press the button ON/OFF TARE to switch the scales on.
The start display appears briefl y, then "0 g" appears automatically.
IMPORTANT
Overloading or improper loading lead to irreparable damage
to the appliance.
► NEVER place more than 5000 g (11 lb) on the weighing plate 1.
► Do not place objects or foodstuff s on the display 3 or on the buttons.
2) If you wish to weigh without the bowl/container, lay the item to be weighed
on the weighing plate 1. The weight will be indicated.
If you wish to weigh the item in a bowl / in a container, fi rst place the empty
bowl / the empty container onto the weighing plate 1. Press the button
ON/OFF TARE
. The display 3 indicates 0 g. Place the items to be
weighed in the bowl/container. The weight of the items is shown.
Weighing additional items (tare)
To weigh in further amounts (e.g. fl our and water for dough), you can set the
scales back at "0 g".
■ If you wish to return the scales back to "0 g" after the fi rst measurement so
as to measure the next ingredient, press the button ON/OFF/TARE .
The display 3 once again indicates "0 g" and "T" appears in the display 3.
Display nutrient and energy values
1) Place the items to be weighed on the scales.
2) Find the appropriate code for the food to be weighed from the food list.
3) Enter in the 3-fi gure code with the number buttons 7, e.g. 024. The display 3
then indicates the code and the weight.
NOTICE
► If you make an error when putting in the codes, briefl y press the button
MC
C
6. The code will be deleted. Enter the code in once again.