Silvercrest SNAW 1000 A1 - Manual (Page 126)

123
GB
MT
SNAW 1000 A1
Troubleshooting
In this chapter you will receive important information for malfunction localization
and remedies. Observe the instructions in order to avoid danger and damage.
WARNING
Observe the following safety information to avoid danger and property
damage:
► Repairs to electronic appliances may only be carried out by specialists
who have been trained by the manufacturer. Considerable danger to the
consumer and damage to the appliance can occur as a result of incorrect
repairs.
The following table will help with localizing and remedying minor malfunctions:
Display Possible cause Solution
In the display 3
"L0" is indicated and
the battery symbol
appears
The battery is very weak.
Replace the battery.
No indicators in the
display 3.
The battery is discharged.
The plastic strip in the
battery compartment
has not been removed.
Replace the battery.
Remove the plastic strip from the
battery compartment.
In the display 3
"0 - Ld" appears
The permitted maximum
weight of 5 kg/ 11lb is
being exceeded.
Remove some weight from the scales.
In the display 3
"NULL" appears
when one tries to
retrieve the saved
values.
No values have been
saved. The memory is
empty.
First save some measured values.
NOTICE
► If you cannot resolve the problem with the above steps, please contact
Customer Support.