Silvercrest 10-IN-1 REMOTE CONTROL SFB 10.1 B2 User Manual

Page 25

Advertising
background image

- 23 -

To programme favourites

Your favourite stations are saved as follows:
1. Press the device button e for the device that you want to

save a favourite.

2. Hold down the S button r for a little longer than 3 sec-

onds. The notice "LANGUAGE SETUP" appears.

3. With the  or  button t select "FAV CH SETUP" and

confirm with the OK button l. In the display "FAV CH 1

SETUP" appears.

4. With the  or  button t select the memory slot to be

programmed (FAV CH 1 - 4 SETUP) and confirm with the

OK button l.

5. In the LCD display q "FAV CH STEP" appears. Now

press, one after the other, the buttons (max. 4) for access

to your desired favourite stations.

6. When the maximum number of button commands is

reached the LCD display q shows "FULL".

7. Save the entry with the S button r. In the LCD display q

"FAV CH SETUP 1 - 4" appears.

8. If, with the selection of the favourites to be programmed

(step 4), you select a memory slot that is already occu-

pied the existing favourite will be overwritten.

9. Repeat the steps to apply further favourites.

10. With the EXIT button y you move a level backwards in the

menu except during the entry of the button commands.

Note:

The input of the channel numbers can vary according to

the model and brand of the selected devices. If necessary,

with multi-digit channel numbers you must first press the

button a.

To access favourites

To access a pre-programmed favourite press the FAV/EPG

button 1( followed by the corresponding number button for

the desired memory slot (1 - 4).

Delete All FAV channels

To delete all pre-programmed favourites proceed as follows:
1. Hold down the S button r for a little longer than 3 sec-

onds.

2. With the  or  button t select "FAV CH SETUP" and

confirm with the OK button l. In the display "FAV CH 1

SETUP" appears.

3. With the  or  button t select "FAV CH CLEAR" and

confirm with the OK button l.

4. In the LCD display q "CONFIRM CLEAR" (confirm delete)

appears. Confirm the delete process with the OK button l.

The LCD display q shows "SUCCESS". All favourites are

now deleted and the menu will end.

Tips:

1. When the LCD display q shows "CONFIRM CLEAR" you

can stop the delete process with the EXIT button y.

BDA_SFB 10.1 B2 - IAN-86342_gb.indd 23

06.12.2012 11:51:57

Advertising