Silvercrest SFM 840 A1 - Manual (Page 66)

64
5. Before using for the first time
1. Please clean the individual parts of the
deep-fat fryer thoroughly (see
“9. Cleaning” on page 67).
2. Then carefully dry the individual parts.
6. Before use
1. Place the deep-fat fryer on a level and
stable surface.
2. Unwind the mains cable completely.
Caution! Make sure that the cable does
not come into contact with the hot parts of
the fryer so that it is not damaged.
3. Press the unlock button of the frying
lid 8.
The frying lid 3 will open.
4. Remove the frying basket 2.
6.1 Preparations for frying
1. Place the frying lid 3 in the casing 9 if
you have not already done so.
2. Insert the handle for the frying basket 1
in the frying basket 2:
– Press the two metal ends of the handle
together slightly;
– Insert the handle in the lugs on the
inside of the frying basket;
– Move back the handle until it audibly
engages.
The appliance is now ready for frying.
6.2 Preparations for fondue
1. Pull the frying lid 3 up out of the
casing 9.
2. Place the fondue lid 13 on the casing 9.
6.3 Add the oil or fat
You should use either liquid frying oil or
solid frying fat for frying.
You should melt solid frying fat in a frying
pan or saucepan before adding it to the
fryer.
Broth can also be used for fondue.
Caution! The appliance is not suitable for
chocolate or cheese fondue.
Note: Never mix different types of fat or
oil!
1. Add oil or melted fat up to the upper
"MAX" marking of the fat container 6 in
the dry and empty fryer.
2. Insert the plug in a socket.
RP89446 Friteuse mit Fondue LB1 Seite 64 Mittwoch, 10. April 2013 2:53 14