Silvercrest SLB 1.2 B2 - Manual (Page 11)

GB
8 SLB 1.2 B2
Switching bass and treble boost on/off
♦ Turn the BASS switch 3 to the “ON” position in order to
switch the loudspeaker 6 bass boost on.
♦ Turn the BASS switch 3 to the “OFF” position in order to
switch the loudspeaker
6
bass boost off .
♦ Turn the TREBLE switch 2 to the “ON” position in order to
switch the loudspeaker 6 treble boost on.
♦ Turn the TREBLE switch 2 to the “OFF” position in order to
switch the loudspeaker
6
treble boost off .
Connecting headphones
WARNING
Loud music can lead to hearing damage.
► Avoid extremely loud sound levels, especially over
long periods of time, when you are using head-
phones.
♦ Ensure that the rotary switch 4 is in the OFF position.
♦ Insert the 3.5 mm jack plug of the headphones into the head-
phone socket
5
.
♦ Before placing the headphones on your head, switch the loud-
speaker
6 on again and carefully increase the volume.
NOTE
► As soon as you connect the headphones, the loudspeakers 6
will be muted.
► The headphone output is passive, which means that the volume
can be controlled using the rotary switch
4
, but the maximum
volume is specifi ed by the computer or audio device. Please
note that headphones may only be connected if the audio device
has the necessary standard volume limitation applied to its
output. Please refer to your audio device instruction manual for
more information.
IB_89655_SLB1.2B2_LB4.indb 8 IB_89655_SLB1.2B2_LB4.indb 8 16.05.13 11:14 16.05.13 11:14