Fault rectifi cation, Malfunction causes and remedies – Silvercrest SLB 1.2 B2 User Manual

Page 12

Advertising
background image

9

SLB 1.2 B2

GB

Fault rectifi cation

This section contains important information on fault localisation and
rectifi cation. Observe the instructions in order to avoid risks and
damage.

Malfunction causes and remedies

CAUTION

The loudspeakers may not be opened!

There are no parts which can be cleaned or maintained inside
the device. Opening the loudspeakers will result in irreparable
damage to the device.

The following table will help with localising and remedying minor
malfunctions:

Defect

Possible cause

Rectifi cation

No sound.

The volume control of
the player or the loud-
speaker

6

is set to

the minimum volume.

Increase the volume
at the audio device or
the loudspeaker

6

.

The audio device has
been muted.

Switch the audio
device muting off
again.

Audio device or
loudspeaker

6

not

switched on.

Ensure that all devices
are switched on.

The 3.5 mm jack plug

8

is not fully inserted

into the audio device's
headphone socket.

Insert the 3.5 mm
jack plug

8

fully

into the socket.

No sound or
volume too low
on connected
headphones.

The volume control
of the audio device
is set to the minimum
volume.

Increase the volume
at the audio device.

Headphones defective.

Check the head-
phone function on the
audio device itself.

NOTE

If the aforementioned solutions do not resolve the problem,
please contact Customer Service (see chapter Service).

IB_89655_SLB1.2B2_LB4.indb 9

IB_89655_SLB1.2B2_LB4.indb 9

16.05.13 11:14

16.05.13 11:14

Advertising