Silvercrest SLB 1.2 B2 - Manual (Page 7)

GB
4 SLB 1.2 B2
■ Never make a knot in the connection cable and do not bind it
together with other cables. The power cable should be routed
so that it cannot be stepped on or tripped over.
■ This device is not intended for use by persons (including children)
with limited physical, physiological or intellectual abilities or lack
of experience and/or knowledge unless they are supervised by a
person who is responsible for their safety, or receive instructions
from this person on how to use the device.
■ Children should be supervised to ensure that they do not play
with the device.
■ Only have repairs carried out by authorised specialist companies
or the Customer Service department. Improper repairs can pose
signifi cant risks to the user. Warranty claims also become void.
■ Repairs to the device during the warranty period may only be
carried out by a customer service department authorised by the
manufacturer. Otherwise no additional warranty claims can be
considered for subsequent damage.
■ Defective components must always be replaced with original
replacement parts. It can only be guaranteed that safety require-
ments are complied with if original replacement parts are used.
■ Never attempt to open the device. There are no parts which can
be cleaned or maintained inside the device. Do not perform any
modifi cations or changes to the device yourself.
■ Never operate the device in the vicinity of naked fl ames, and do
not place candles on or next to the device.
■ Protect the device from moisture, spray and dripping water and
the penetration of liquids. Do not place objects containing liquid
(e.g. fl ower vases) on or near the device.
■ If liquid penetrates the device, switch it off , disconnect it from
the power supply and have it inspected by qualifi ed specialists
before using it again.
■ If the device is moved from cold to warm surroundings, wait for
approx. 2 hours until the device has reached the ambient tem-
perature before switching it on.
■ If you are using a USB power supply, the mains socket used must
always be easily accessible so that the USB power supply can
be quickly disconnected from the socket in a hazardous situation.
IB_89655_SLB1.2B2_LB4.indb 4 IB_89655_SLB1.2B2_LB4.indb 4 16.05.13 11:13 16.05.13 11:13