Silvercrest SKRI 2000 A1 - Manual (Page 104)

101
Handling and operation
SKRI 2000 A1
GB
MT
Button lock
You can lock the buttons of the appliance so that settings cannot be altered by
unauthorised people.
Press and hold the button Mode / Lock ♦ 11 , or the Mode Lock button 45 on
the remote control, for at least two seconds to switch the button lock either
on or off . When the button lock is switched on, in the display
the symbol
appears.
To release the lock, press and hold the button Mode / Lock ♦ 11 , or the Mode
Lock button 45 on the remote control, for at least two seconds.
Bass accentuation
With the bass accentuation you can switch on an enhanced playback of the low
frequencies.
For about 2 seconds press the button ♦ i-Time Sync i-Time Sync Bass 12 , or the button
iTime Sync Bass 43 on the remote control, to switch the bass accentuation
on or off . With bass accentuation switched on, the symbol appears
in the display.
Alternating display
Prerequisite: The appliance is in the operational mode clock/standby operation.
Press the button ♦ i i / Down 19 , or the / Down button 32 on the remote
control, the date and time are indicated alternately.
Press the button ♦ i i / Down
19
, or the / Down button 32 on the remote
control, once more and only the time is indicated.
Prerequisite: The appliance is in the radio operational mode.
By pressing the button Mode / Lock ♦ 11 , or the Mode Lock button 45 on
the remote control, the reception frequency resp. the station name (for RDS
reception) and the time are displayed alternately.
Press the button Mode / Lock ♦ 11 , or the Mode Lock button 45 on the remote
control, once more to only indicate the time.
Press the button Mode / Lock ♦ 11 or the Mode Lock button 45 on the remote
control, once more to indicate only the reception frequency resp. the station
name (for RDS reception).
IB_63920_SKRI2000A1_LB5.indb Abs3:101 17.01.2012 11:33:15 Uhr