Silvercrest SKRI 2000 A1 - Manual (Page 107)

104
Troubleshooting
SKRI 2000 A1
GB
MT
Malfunction causes and remedies
The following table will help with the localising and remedying of minor malfunc-
tions:
Defect Possible cause Solution
The display is
showing nothing.
The power adapter 15 has
not been connected.
Insert the power adapter 15 into a
mains power socket.
The mains power socket is
not supplying any power.
Check the circuit fuse.
No sound
The volume is set to minimum.
Increase the sound volume with the
button Vol+
3 .
The appliance is in the
operational mode clock/
standby operation. With the button Power 6 switch
the appliance into the operating mode
Radio/iPod/Aux.
Playback of the external
audio appliance has not
started.
Start playback of the external audio
appliance.
Playback of the iPod/iPhone
has not started.
Start playback of the iPod/iPhone.
The iPod/iPhone is not
properly inserted into the
station
29
Insert the iPod/iPhone correctly into
the station
29 .
Noisy radio
reception
The radio station is not
properly tuned in.
Using the buttons / Up
17
and
i i / Down
19
, tune the radio station
in to the ideal reception.
Reception is too weak.
Try to improve reception by moving
the wire antenna
27 .
iPod/iPhone is not
being charged
The iPod/iPhone is not
properly inserted into the
station
29 .
Insert the iPod/iPhone correctly into
the station
29 .
The alarm with
iPod/iPhone has
not functioned
The selected playlist on your
iPod/iPhone is empty.
Ensure that the playlist contains music.
NOTICE
If you cannot solve the problem with the aforementioned methods, please ►
contact the Customer Service Department.
IB_63920_SKRI2000A1_LB5.indb Abs3:104 17.01.2012 11:33:18 Uhr