Handling and operation, Gb mt setting the date – Silvercrest SKRI 2000 A1 User Manual
Page 90
87
Handling and operation
SKRI 2000 A1
GB
MT
Setting the date
Prerequisite: The appliance is in the operational mode clock/standby operation.
Press the button Mode / Lock
♦
11
, or the Mode Lock
45
button on the remote
control, twice. The date indicator begins to blink.
Using the buttons
♦
/ Up
17
and
i
i
/ Down
19
or the
/ Up
42
and
/ Down buttons
32
on the remote control, set the current date. With
each press of the button the date is changed by one day. The weekday
indicator changes automatically. Holding the respective button down for
more than 2 seconds starts the speed setting.
Press the button Mode / Lock
♦
11
, or the Mode Lock
45
button on the remote
control, once again to save the current setting and move on to the next menu item.
NOTICE
The date will revert back to
►
if the appliance is disconnected
from the mains power supply and no battery is inserted or if the battery is
too weak.
Setting the memory function
You can set up to 6 dates on which an automatic reminder will be triggered.
The function SDA (Special Day Alert) is useful as a reminder, for example, of
birthdays or other recurring events. The reminder occurs every year on the same
date. On these dates an alarm tone is sounded for 10 minutes, every hour on the
hour, from 08:00 to 23:00.
Prerequisite: The appliance is in the operational mode clock/standby operation.
Press the button Mode / Lock
♦
11
, or the Mode Lock
45
button on the remote
control, three times. The current setting of the selected reminder dates is
shown alternating with the indicator
. Next to the indicator
is the
number of the memory slot for that date. Possible classifi cations are
to
.
Using the button
♦
i
i
/ Memory Scan
14
, or the Memory-Scan
36
button
on the remote control, select storage slot of the date to be set.
Using the buttons
♦
/ Up
17
and
i
i
/ Down
19
or the
/ Up
42
and
/ Down
32
buttons on the remote control, set the current date for
this memory slot. With each press of the button the date is changed by one
day. Holding the respective button down for more than 2 seconds starts the
speed setting.
IB_63920_SKRI2000A1_LB5.indb Abs3:87
17.01.2012 11:32:48 Uhr