Silvercrest SUSR 17 A1 - Manual (Page 12)

Scanradio SUSR 17 A1
12 - English
Connecting the Headphones
Insert the jack-type plug of the supplied headphones into the
headphones receptacle (6) on the side panel of the unit.
Getting Started
Powering On and Adjusting the Volume
 Rotate the volume adjustment knob (7) counter-clockwise, to
power the radio on. This will adjust the audio volume at the
same time. Turn the volume adjustment knob counter-
clockwise to increase the sound volume, or turn it clockwise
to lower the volume.
 Turning the volume adjustment knob clockwise as far as it
goes will power the device off.
Tuning a Radio Station
To be able to receive any radio stations, the
supplied headphones must be connected to the
headphones receptacle. The cable of the
headphones is used as antenna.
 Use the volume adjustment button (7) to set the desired
sound volume.
 Press the SCAN button (2) to launch an automatic station
search. As soon as a station has been found, the scan will
stop and the radio programme can be listened to.