Silvercrest SUSR 17 A1 - Manual (Page 13)

Scanradio SUSR 17 A1
English - 13
 To switch to a different station, press the SCAN button (2)
again. The next available station will be searched for.
 The scan is always performed up to the end of the frequency
band. To launch a scan from the beginning of the frequency
band, press the RESET button (3).
Setting the Time
The time can only be set while the device is powered off. If it is
still powered on, power the device off by using the volume
control knob (7).
 Press and hold the TIME button (1).
 Then press the HOUR button (10) repeatedly to set the hour.
You can also keep the HOUR button (10) pressed down to
accelerate the digit adjustment. To distinguish ante meridian
(morning) and post meridian (afternoon) time, "PM" will
display for post meridian clock hours.
 Keep the TIME button (1) pressed. Then press the MIN
button (8) repeatedly to set the minutes. You can also keep
the MIN button (8) pressed down to accelerate the digit
adjustment.
 Release the TIME button (1) after the clock has been set
correctly.