Silvercrest SZP 40 A1 - Manual (Page 33)

31 GB
5. Wipe the motor block6 with a damp
cloth.
6. Wash all of the detachable components
by hand or in a dishwasher.
7. Dry all parts carefully, before reassem-
bling the device and storing it.
8. Storage
1. Figure E: the power cable8 can be
stored in the cable compartment7.
2. Place the lid1 on the device as a pro-
tection against dust.
9. Disposal
The symbol showing a wheel-
ie bin crossed through indi-
cates that the product
requires separate refuse col-
lection in the European Un-
ion. This applies to the
product and all accessories marked with this
symbol. Products identified with this symbol
may not be discarded with normal house-
hold waste, but must be taken to a collection
point for recycling electric and electronic ap-
pliances. Recycling helps to reduce the con-
sumption of raw materials and protect the
environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
10. Troubleshooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock! Do not attempt to repair
the device yourself under any cir-
cumstances.
11. Technical
specifications
Subject to technical modification
Fault
Possible causes /
Action
No function
• Is the device connect-
ed to the mains power
supply?
The juicer
cone2 stops
turning
• Have you exerted ex-
cessive pressure on the
juicer cone2?
• Is a foreign body locat-
ed in the device?
Model: SZP 40 A1
Mains voltage: 220-240 V ~ 50 Hz
Protection class: II
Power rating:
40 W
__RP104443_B1.book Seite 31 Donnerstag, 20. November 2014 3:34 15