Efficient Networks EEE 802.11b/g Wireless USB 2.0 Adapter - Manual (Page 21)

IEEE 802.11b/g Wireless USB 2.0 Adapter Version 1.2
21
h User Name: Enter the user name for the certificate authority.
h Password: Enter the password that corresponds with the user name for
the certificate authority.
h Confirm Password: Re-type the password.
Click on the Advanced button.
h Specific Server or Domain: Leave the server name blank for the client
to accept a certificate from any server with a certificate signed by the
authority listed in the Network Certificate Authority drop-down list.
(Recommended). You can also enter the domain name of the server
from which the client will accept a certificate.
h Login Name: Enter the login name if required.
Click on the OK button to return to the previous window. Once again, click on
the OK button to return to the Profile Management window.
3.2.3.3 WPA – PEAP (EAP-GTC)
PEAP (EAP-GTC) was standardized along with EAP in RFC 2284. EAP-GTC
allows the exchange of clear text authentication credentials across the network.
The GTC method does provide a way to move a simple username and password
from client to server using an EAP method, so it can be used to provide an
authentication method. Naturally, if EAP-GTC is used to transport reusable
passwords, it must be used inside a tunnel for protection and server
authentication. EAP-GTC can be used with both TTLS and PEAP.
Select the WPA radio button, and then select PEAP (EAP-GTC) from the drop-
down list.