Efficient Networks EEE 802.11b/g Wireless USB 2.0 Adapter - Manual (Page 23)

IEEE 802.11b/g Wireless USB 2.0 Adapter Version 1.2
23
h Specific Server or Domain: Leave the server name blank for the client
to accept a certificate from any server with a certificate signed by the
authority listed in the Network Certificate Authority drop-down list.
(Recommended). You can also enter the domain name of the server
from which the client will accept a certificate.
h Login Name: Enter the login name if required.
Click on the OK button to return to the previous window. Once again, click on
the OK button to return to the Profile Management window.
3.2.3.4
WPA – PEAP (EAP-MSCHAP-V2)
The PEAP (EAP-MSCHAP V2) authentication type is based on EAPTLS
authentication, but uses a password instead of a client certificate for
authentication. PEAP (EAP-MSCHAP V2) uses a dynamic session-based WEP
key, which is derived from the device and RADIUS server, to encrypt data.
Select the WPA radio button, and then select PEAP (EAP-MSCHAP-V2) from
the drop-down list.