Before using for the first time, Before frying, 8 handling batteries – Silvercrest SKF 2800 A1 User Manual

Page 66: 1 add the oil or fat, 2 melt existing fat

Advertising
background image

64

4.8 Handling batteries

Warning!
To prevent a risk of explosion,
normal batteries must not be
charged, heated or disposed of by
burning.

• Never try to open the batteries.

To prevent injury if battery acid has
leaked out, avoid contact with the skin,

eyes and mucous membranes. In the
event of contact with the acid, rinse the
affected areas immediately with plenty
of clean water and contact a doctor at
once.

Caution! To avoid damaging the
appliance and to ensure it functions
correctly, please note:
• Only use type AG13 batteries.

5. Before using for the first time

1. Please clean the individual parts of the

deep-fat fryer thoroughly (see
“9. Cleaning and storing” on page 67).

2. Then carefully dry the individual parts.

6. Before frying

1. Place the deep-fat fryer on a level and

stable surface.

2. Unwind the mains cable completely.
Caution! Make sure that the cable does
not come into contact with the hot parts of
the fryer so that it is not damaged.
3. Press the unlock button 7 to release the lid.

The lid 4 will open.

4. Move up the handle of the frying

basket 1 until it audibly engages.

5. Remove the frying basket 14.

6.1 Add the oil or fat

You should either use liquid frying oil or
solid frying fat.
You should melt solid frying fat in a frying
pan or saucepan before adding it to the
fryer.
Note: Never mix different types of fat or oil!

1. Add oil or melted fat up to the upper

"MAX" marking of the fat container 13
in the dry and empty fryer.
Note: If you only want to fry small
quantities, a bit less oil or fat may well
be enough. However the items to be
fried must always be completely covered
and the fat or oil must reach at least as
far as the lower "MIN" marking of the fat
container 13.

2. Insert the plug in a socket.

6.2 Melt existing fat

If the fryer already contains solidified fat
from an earlier frying session, it must be
melted in the fryer. Do this very carefully so
that the melting fat does not start to spit or
the fryer does not overheat.
1. Insert the plug in a socket.

RP95885 Fritteuse LB1 Seite 64 Montag, 17. Februar 2014 2:24 14

Advertising