Elmo Ceiling Presenter HV-C1000XG - Manual (Page 24)

11
23
1
2
3
4
5
6
7
8
9
10
Focus
Adjust the focus of the object.
■ Auto Focus
When the [AF](AUTO FOCUS) button on the
wireless remote control is pressed, the focus is set
automatically.
This product features a one-push AUTO FOCUS
function. Once focusing is completed, the AUTO
FOCUS function is released, and the focused position
maintains unchanged (FOCUSFREE).
The objects listed below may not be brought into
focus in the AUTO FOCUS mode. In these cases,
use the MANUAL FOCUS mode.
• Objects bearing little contrast
• Objects with fine repeated patterns, such as
lateral stripes and cross stripes
• Objects glittering or reflecting strong light
• Objects with bright background, or excessive
contrast
• The whole image is dark.
• Objects located near and far away at the same
time
• Objects in motion
Some objects require a long auto focus time.
When the MANUAL FOCUS buttons ([FOCUS
·NEAR] or [FOCUS·FAR] button) on the.wireless
remote control are pressed,the AUTO FOCUS
operation is reset.
When the ZOOM buttons ([ Z O O M · T E L E ] or
[ZOOM·WIDE] buttons) on the wireless remote
control are pressed, the AUTO FOCUS operation
is suspended.
If some other operation is performed in AUTO
FOCUS operation, the AUTO FOCUS operation may
not be completed normally.
FOCUS can be adjusted at a distance of 1.3m or
more from the unit to the object in the max. side of
[ZOOM·TELE].
CONTRAST LAMP
IMAGE ROTATION F.A.M.
POSI/NEGA COLOR/B&W
IRIS
NORMAL OPEN CLOSE
TELE ZOOM
MENU
WIDE NEAR FOCUS FAR
IMAGE CALL
POWER
PAUSE
AF
SET PRESET CALL SET
IRIS
NORMAL OPEN CLOSE
TELE OO WIDE NEAR FAR
AF
Wireless remote control
Wireless remote control
•OSD........ P.27
Reference Page