Elmo Ceiling Presenter HV-C1000XG - Manual (Page 26)

25
1
2
3
4
5
6
7
8
9
10
11
Preset Operation
Operation status of this product can be stored / read
out in the memory (max. 8 states can be stored).
Operation states that can be stored are as shown
below.
• Present zoom angle of view
• Status of IRIS
• White Balance status
• ON/OFF of Aperture
• Status of Gamma
• Lighting status
• Status of COLOR/B&W switch
• Condition including pointer ON/OFF, color and
shape
• Condition of IMAGE ROTATION
• ON/OFF of CONTRAST mode
• Status of POSI/NEGA conversion
• Status of F.A.M. selection
1. How to store
Press the [PRESET.SET] button on the wireless
remote control and press the MEMORY NO.
button of the wireless remote control within 4 sec
then the current status of this product is saved in
the pressed number memory.
The preset (stored) status is maintained even when
the power is turned OFF.
2. How to read out operation status
Press the [PRESET.CALL] button on the wireless
remote control and press the MEMORY NO.
button of the wireless remote control within 4 sec
then this product is set to the memorized status
corresponding to the number.
CONTRAST LAMP POSI/NEGA COLOR/B&W
IMAGE CALL SET PRESET CALL SET
Wireless remote control
CONTRAST LAMP
IMAGE ROTATION F.A.M.
POSI/NEGA COLOR/B&W
IRIS
NORMAL OPEN CLOSE
TELE ZOOM
MENU
WIDE NEAR FOCUS FAR
IMAGE CALL
POWER
PAUSE
AF
SET PRESET CALL SET
Wireless remote control
•OSD........ P.27
Reference Page