Tube drainage – Silvercrest SLE 320 A1 User Manual

Page 19

Advertising
background image

16

SLE 320 A1

GB

Tube drainage

In very damp rooms, it is often more appropriate for the water not to collect in
the water tank, but for it to be drained directly by means of a tube.

WARNING

When draining via the tube, sustained operation of the appliance is man-
dated. This means that the condensate must be able to drain securely so
that no pooling forms on the fl oor.

Using a screwdriver, prise open the closure

13

on the reverse of the appli-

ance and remove the plug

14

.

Position the tube

25

, supplied with the appliance, over the outlet aperture

for the drainage tube.

Then insert the plug

14

into the outlet aperture for the water tank (see Figure 2).

Fig. 2

Set up the appliance such that the end of the tube is positioned over a drain.
Thus, the open end of the tube must be positioned beneath the appliance's
outlet (i.e. the tube must slope downwards).

Switch on the appliance as usual and select a programme.

If you wish to drain the water tank

5

again, switch off the appliance, with-

draw the tube

25

and remove the plug

14

from the outlet aperture for the

water tank and insert it again into the outlet aperture for the drainage tube.

13

25

14

IB_96805_SLE320A1_LB4.indb 16

24.07.14 11:56

Advertising