Cleaning – Silvercrest SLE 320 A1 User Manual

Page 20

Advertising
background image

17

SLE 320 A1

GB

Cleaning

CAUTION

Potential appliance damage!

Protect the appliance from moisture and from the ingress of fl uids.

To avoid irreparable damage to the appliance, never immerse it in water.

Always remove the mains plug from the mains power socket before clean-
ing the appliance.

Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.

Do not clean the water tank

5

in a dishwasher. Otherwise, it will be

damaged.

If required, wipe the casing with a slightly damp cloth.

Remove the water tank

5

and pour away the water; then dry the water

tank

5

thoroughly, both inside and out, before replacing it.

In order to clean the inside of the water tank

5

, you must remove the black

lid. To do this, release the carrying handle from the retainer while pressing
it out sideways. When doing so, ensure that the handle plug coincides with
the opening in the water container (See Figure 3.)

Fig. 3

Now, remove the black lid from the water tank

5

.

To insert, follow the reverse sequence.

It is recommended that the water tank

5

be cleaned regularly every two

weeks to prevent the build-up of mould and bacteria. To do this, fi ll the
water tank

5

with lukewarm water, adding a standard detergent. Rinse

repeatedly with lukewarm water. In addition, disinfection is recommended
following cleaning. To do this, use a standard, alcohol-based disinfecting
agent or high-proof alcohol. Both substances are completely harmless if
followed by repeated rinsing with lukewarm water.

5

IB_96805_SLE320A1_LB4.indb 17

24.07.14 11:56

Advertising