Powerfix Z31361 - Manual (Page 58)

58
Practical information regarding the use and care of lashing straps
˜
Practical information regarding the use and
care of lashing straps
1. In selecting and using lashing equipment, you must consider the
required lashing force, the mode of use and the type of cargo to
be lashed. The size, shape and weight of the cargo as well as the
intended mode of use, the transport environment and the type of cargo
determine the correct choice. For stability reasons, at least two lashing
straps must be used for lashing down and two pairs of lashing straps
used for diagonal lashing.
2. Due to different characteristics and because of different changes in
length under load, only identical lashing device combinations (e.g.
lashing chains and lashing strap made of synthetic fibres) may be used
in parallel for lashing the same load. When using additional fittings
and lashing devices, make sure that they fit the lashing strap.
3. Opening the lashing: Before opening, make sure that the cargo is
stable even without being secured and does not endanger unloading
personnel by falling down. If necessary, attach blocking devices to the
cargo that has been planned for further transport beforehand in order
to prevent the load falling or tipping over. This also applies if one uses
tensioning elements that make safe removal possible.
GB/MT