Epson AcuLaser CX37DNF - Manual (Page 46)

3. From the tree that is displayed, click the speed dial number to be programmed, and then click New
Registration button.
Note:
❏ A maximum of 001-250 speed dial numbers can be programmed.
❏ The registered list can be switched over when Speed Dial Setting is changed.
❏ When Fax/E-mail or Scan To Server is selected, and New Registration button can be selected,
non registered number is automatically assign the speed dial number.
4. In the Speed Dial Registration dialog box, specify the desired settings.
Note:
❏ To register a fax or e-mail destination, refer to “Adding a Speed Dial Number (Fax/E-mail)” on
page 46.
❏ To register an FTP or SMB destination, refer to “Adding a Speed Dial Number (Scan To Server)”
on page 47.
5. Click the OK button.
Programming of the speed dial number is completed.
Adding a Speed Dial Number (Fax/E-mail)
The following procedures describe how to send scan data with a fax number or e-mail address. The
transmission settings and destination can first be registered as a speed dial number.
For registering a fax number
1. Click the New Registration button.
2. Select Fax.
3. Specify the settings for the speed dialing.
❏ A maximum of 20 characters can be entered for a name.
❏ A maximum of 50 numbers can be entered for a fax number.
4. Click the Details button, and then specify the transmission speed and batch transmission time.
Epson AcuLaser CX37 Series Reference Guide
Using Local Setup Program (for Epson AcuLaser CX37DNF only) 46