Encore electronic ENMGS-16+2 - Manual (Page 33)

Configuring the Switch
The 16-Port 10/100/1000Mbps Web-Smart Gigabit Ethernet Switch
has a Web GUI interface for smart switch configuration. The Switch
can be configured through the Web Browser. A network administrator
can manage, control and monitor the switch from the local LAN. This
section indicates how to configure the Switch to enable its smart
functions
Login
Before you configure this device, note that when the ENMGS-16+2
Switch is configured through an Ethernet connection, make sure the
manager PC must be set on same the IP network. For example, when
the default network address of the default IP address of the Web Smart
Switch is 192.168.1.1, then the manager PC should be set at
192.168.1.x (where x is a number between 2 and 254), and the default
subnet mask is 255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address http://192.168.1.1 (the factory-default IP address
setting) to the address location.
Figure 13.
25