Elation Professional X-Fogger - Manual (Page 10)

! X-30: All the X-10 features plus wireless capability.
Wireless operation is possible up to a distance of 50
meters. The address can be set from 0 to 8, which means
total 9 different units can be controlled separately or in
any combination desired. Press function to cycle to RF
mode to select desired address number. Make sure the
address setting on the X-30 matchs the address setting
on the transmitter. There are two buttons on the
transmitter. One is to release fog, the other is to stop the
operation.
On X Foggers such as X-510, X-515 and X-530, X-20 uses only 1
channel to control volume output operation. On X Fazer such as
X-310, X-20 uses 2 channels to control both fog volume and fan
volume. Whatever channel you select on the unit, the channel
next to it will be selected automatically for fan volume control.
Each channel has a value range of 0 to 225. Timer functions such
as duration and interval can be programmed using the DMX
controller or the DMX control software being used by lighting and
effects operator.
ANTARI X-20 DMX Module Settings
8
0 - 5
6 - 249
250 - 255
OFF
Volume Control( 5% - 95%)
Maximum Volume Output ( 100%)
Value Function