Elation Professional X-Fogger - Manual (Page 13)

Performance Notes
Please read and save these instructions
!
All fog machines develop condensation around the
output nozzle. Because this may result in some
moisture accumulation on the surface below the output
nozzle, consider this condensation when installing your
unit.
!
All fog machines may sputter small amounts of fog
occasionally during operation and for a minute or so
after being turned off.
!
All fog machines have a recycling period after long
bursts when the machine will shut itself down for a
short period in order to heat up again. During this time,
no fog can be produced.
!
If the supply cord is damaged, it must be replaced by
ANTARI or its unhorized dealer to avoid a hazard.
11