MCZ Klee User Manual
Page 15
Advertising
INSTALLATION AND USE MANUAL
Chapter 3
KLEE
page
15
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
Position the hood support thus assembled with the pins completely in the holes of the slate sides
Fasten the hood support to the Klee frame using 1 screw M5X12 and 1 flanged nut M5 (see drawing) for each
hole.
SPALLA
ACCIAIO
SPALLA
ARDESIA
ALLINEATE
N.B. If the slate sides move slightly, you can add a small amount of marble cement in the holes. Be
careful not to soil the rust-effect painted hood support/fire bed (the damage may be irreparable).
Complete the counter-wall (wall for recessed installation) by insulating it at the front and top from the Forma
Puro unit.
Advertising