MCZ Magritte User Manual
Page 10
INSTALLATION AND USE MANUAL
Chapter 3
MAGRITTE
page
10
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.4. PHASE 3 - ASSEMBLY OF FIRE BED AND BENCH TOP (elements 4 and 5)
Dry position the fire bed (it is advisable to provide two temporary supports) and the bench top as in the figures.
Check that they square, level, and rest perfectly on the riser elements so as to form a single surface.
MAGRITTE FORMA PURO75
A FILO
A FILO
Cement the fire bed and the bench top to the marble support of the centre riser, to the centre riser itself and to
the bench riser.
N.B. After fastening, make sure that the entire structure (consisting of the fire bed, bench top and
risers)
is solid and stable. Incorrect assembly may cause the fire bed to overturn.
Adjust the position of the Forma fireplace stove so that the distance with respect to the fire bed is 5 mm.