MCZ Magritte - Manual (Page 7)

INSTALLATION AND USE MANUAL Chapter 3
MAGRITTE page 7
Chapter 3 Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.2. PHASE 1 - POSITIONING OF FIREPLACE STOVE PURO75 (F/PURO95)
Place Forma Puro75 (Forma Puro95) in the desired position and at a safe distance from the rear wall. Raise the
fireplace stove so that the height of the edge-cover profile from the floor is 340 mm (=height of fire bed of
cladding).
A second adjustment of the unit, if necessary, is made during assembly of the cladding.
N.B. It is necessary to create a support base upon which to fasten the Puro75/95. The unit must be
stable and firmly in contact with the floor.
Before making the connection to the flue pipe and with the installation of the fireplace stove complete, check the
correct position of Forma Puro75 (Forma Puro95) with respect to the central riser (1) and fire bed (4) of the
Magritte cladding. It is advisable to dry position the two components. Make sure to provide temporary supports
for the fire bed. When the check is complete, install the unit Forma Puro 75 (Forma Puro 95) in accordance with
the instructions in the respective Manual for Installation and Use and run a quick test for proper operation. If the
test is successful, you can install the Magritte cladding.
PROFILO
COPRIBORDO
42
BASE APPOGGIO
FORMA PURO
PAVIMENTO
34
0
MURO PERIMETRALE
MU
RO PER
IM
ETR
A
L
E
42
MURO PERIMETRALE
PARETE
20
0
IN
CA
SSO
165
ALZATA CENTRALE