Mirage OMD-28 - Manual (Page 5)

om design series manual
2 . 0 g e t t i n g s t a rt e d
3
PACKAGING
The packaging of the OM Design series was
specifically designed to ensure the safe transportation
of your new speakers. If the packaging has been
damaged during shipping, please contact your dealer
or shipping company immediately. Please read the
following instructions carefully to avoid damaging the
speaker cabinets during the installation process.
I N C L U D E D I N T H E B O X
Included in the box is an accessory case with essential
accessories. We highly recommend that you do not
throw out any of the items found in the box, as they
may be needed at a later point in time. The following
items are included in the accessory case:

4 feet (OMD-28 only)

1 lint free cleaning cloth

1 pair of gloves to protect the cabinet finish
(2 pairs are included with the OMD-28)
In addition to the above, the OMD-R comes equipped
with a versatile and easy to use wall bracket that can
be found in the corner of the foam packaging which
protects the cabinet during the shipping process.
UNPACKING
When removing any of the OM Design models from
their respective packaging, please make sure to use
the supplied gloves in order to protect the beautiful
finish on your new speakers. We strongly recommend
using the gloves whenever you need to move or
reposition the speakers. This will ensure that the
flawless fit and finish of your new speakers lasts for
many years to come.
OMD-28
CAUTION: HANDLE WITH CARE. THE HIGH-GLOSS
FINISH ON YOUR OMD-28 SPEAKER CABINETS CAN
EASILY BE SCRATCHED. DUE TO THE SIZE AND
WEIGHT OF THE SPEAKERS, AT LEAST TWO PEOPLE
SHOULD BE AVAILABLE FOR THE UNPACKING AND
INSTALLATION PROCESS!
To remove the OMD-28s from the shipping box,
carefully follow theses steps:
1. Keep the shipping box in an upright position, with
the arrows pointing upwards. Cut the 2 bands of
plastic strapping that secure the shipping box.