Mirage OMD-28 - Manual (Page 6)

om design series manual
2 . 0 g e t t i n g s t a rt e d
4
2. Remove the protective cover from the top of the
box, and tip the box on its side, so that the side
marked with “open here” is pointing upwards.
3. Remove the manual and the accessory kit which
will be visible upon opening the carton. Unpack
the protective gloves contained within the
accessory kit and use them for any of the following
unpacking and installation steps.
4. Remove the foam packing by gently lifting the
packing straight up and out of the interior
cardboard box. You will now see the OMD-28
wrapped in protective material, positioned on a
bottom layer of foam packaging.
5. Remove the top grille from the foam packaging
before removing the cabinet!
6. Lift the OMD-28 out of the shipping box by
grasping the base of the loudspeaker’s sides and
carefully stand the loudspeaker onto its high gloss
base. Do not use the binding posts to lift the
loudspeaker.
NOTE: THE OMD-28 WEIGHS APPROXIMATELY 75
POUNDS. PLEASE USE CAUTION WHEN LIFTING THE
SPEAKER FROM IT’S PACKAGING.