Edirol V1 video mixer - Manual (Page 16)

16
Basic operation
Here’s how to transition (move) between video input sources.
If you’re using a transition effect (Mix or Wipe), you can move between images A
and B by moving the video fader up or down. If you’re using a compositing effect
(Superimpose or P in P), the video fader adjusts the transparency of the composited
images.
fig.07-01-1.eps
Video fader indicators
These indicate the position of the video fader. The indicators will light in one of two
ways depending on the function you’re using.
• When using a transition effect (Mix or Wipe)
If the video fader is all the way up (A) or down (B), a single green video fader
indicator will be lit. If the video fader is between A and B, a single red video fader
indicator at the left of the video fader will be lit.
fig.07-01-2.eps
• When using a compositing effect (P in P or Superimpose)
The green video fader indicator beside the “background image” will light. If the
video fader is in the center, red video fader indicators up to that position will light.
fig.07-01-3.eps
Transitioning between video input sources
Using the video fader to switch video sources
"parent screen" or
"background image"
lit
Transition effects
Mix (p. 18)
Wipe (p. 18)
Compositing effects
P in P (p. 19)
Superimpose (p. 20)