Edirol V1 video mixer - Manual (Page 26)

26
MIDI implementation
● 2-2-1. System Common Preference
● 2-2-2. Clip Control Preference
● 2-2-3. Color Control Preference
3. Additional information
MIDI transmission/reception settings when the V-1 is shipped from the factory.
● Note Mode
This specifies whether note-on messages will switch the inputs.
The factory setting is OFF.
This can be set via MIDI to 0--3, corresponding to OFF, 49Keys Mode, Assign Mode, and
Note Assign.
● MIDI Rx Channel
Specifies the MIDI receive channel of the V-1.
The factory setting is 1.
This can be set via MIDI to 0--16, corresponding to 1--16 and OFF.
● MIDI Tx Channel
Specifies the MIDI transmit channel of the V-1.
The factory setting is 1.
● Transition Time
Specifies the transition time.
When shipped, this is assigned to CC#07 (Volume).
The range is 0--127, corresponding to 0.0 seconds through 4.0 seconds.
● Superimpose
Turns the Superimpose effect on/off and specifies its value.
When shipped, this is assigned to CC#04 (Foot type).
The range is 0, 1--127, corresponding to OFF, ON: 0--Max.
● Transition Pattern
Selects the type of transition.
When shipped, this is assigned to CC#01 (Modulation).
The range is 0--1, corresponding to MIX through WIPE/P in P.
● Output
Controls the output.
When shipped, this is assigned to CC#02 (Breath type).
The MIDI value range is 0--64--127, corresponding to OFF (black)--ON--OFF (white).
● Video Fader
Controls the video fader.
When shipped, this is assigned to CC#11 (Expression).
The MIDI value range is 0--127, corresponding to A--B.
● Default V-LINK settings
The default V-LINK state (i.e., when only the V-LINK ON message has been received) is as
follows.
* When V-LINK is OFF, any V-LINK messages received will be ignored.
* Settings that were modified while V-LINK was on (i.e., settings that can be modified via
MIDI) are not saved.
* When changing from V-LINK ON to OFF, the V-1 will revert to the settings it had before
V-LINK was turned on.
Address Parameter Name Sys.Ex.Value Meaning of Value
10H 00H 00H V-LINK Enabled 00H - 01H OFF, ON
10H 00H 01H V-LINK MIDI Rx Channel
(Clip) 00H - 0FH 1 - 16 Ch.
10H 00H 02H V-LINK MIDI Rx Channel
(Color) --- ---
10H 00H 03H V-LINK Note Message Enabled 00H - 03H Note Mode: OFF,
49Keys Mode,
Assign Mode,
Note Assign
10H 00H 04H V-LINK Fast Control Enabled --- ---
10H 00H 05H V-LINK MMC Control
Mode --- ---
10H 00H 06H V-LINK MTC Control Mode --- ---
10H 00H 07H V-LINK Auto Mix Mode --- ---
Address Parameter Name Sys.Ex.Value Meaning of Value
#10H 10H 00H V-LINK Rx Setting
(Playback Speed) --- ---
#10H 10H 02H V-LINK Rx Setting
(Dissolve Time) 01H-05H,07H-1FH,
40H-5FH, D0H,
E0H, FFH Transition Time:
Control Change,
Channel Press,
Pitch Bend, OFF
#10H 10H 04H V-LINK Rx Setting
(Audio Level) --- ---
#10H 10H 06H V-LINK Rx Setting
(T-Bar Control) 01H-05H,07H-1FH,
40H-5FH, D0H,
E0H, FFH Video Fader:
Control Change,
Channel Press,
Pitch Bend, OFF
#10H 10H 08H V-LINK Rx Setting
(Dual Stream) --- ---
#10H 10H 0AH V-LINK
Reserved --- ---
#10H 10H 0CH V-LINK
Reserved --- ---
#10H 10H 0EH V-LINK
Reserved --- ---
#10H 10H 10H V-LINK Rx Setting
(Transition Select) 01H-05H,07H-1FH,
40H-5FH, D0H,
E0H, FFH MIX, WIPE / P in P:
Control Change,
Channel Press,
Pitch Bend, OFF
#10H 10H 12H V-LINK Rx Setting
(Transformer A) ---
#10H 10H 14H V-LINK Rx Setting
(Transformer B) ---
#10H 10H 16H V-LINK Rx Setting
(BPM Sync) ---
Address Parameter Name Sys.Ex.Value Meaning of Value
#10H 20H 00H V-LINK Rx Setting
(Color Cb) --- ---
#10H 20H 02H V-LINK Rx Setting
(Color Cr) --- ---
#10H 20H 04H V-LINK Rx Setting
(Brightness) --- ---
#10H 20H 06H V-LINK Rx Setting
(VFX A 1) 01H-05H,07H-1FH,
40H-5FH, D0H, E0H,
FFH Superimpose:
Control Change,
Channel Press,
Pitch Bend, OFF
#10H 20H 08H V-LINK Rx Setting
(VFX A 2) --- ---
#10H 20H 0AH V-LINK Rx Setting
(VFX A 3) --- ---
#10H 20H 0CH V-LINK Rx Setting
(VFX A 4) --- ---
#10H 20H 0EH V-LINK Reserved --- ---
#10H 20H 10H V-LINK Reserved --- ---
#10H 20H 12H V-LINK Reserved --- ---
#10H 20H 14H V-LINK Reserved --- ---
#10H 20H 16H V-LINK Rx Setting
(VFX B 1) --- ---
#10H 20H 18H V-LINK Rx Setting
(VFX B 2) --- ---
#10H 20H 1AH V-LINK Rx Setting
(VFX B 3) --- ---
#10H 20H 1CH V-LINK Rx Setting
(VFX B 4) --- ---
#10H 20H 1EH V-LINK Reserved --- ---
#10H 20H 20H V-LINK Rx Setting
(Output Fader) 01H-05H,07H-1FH,
40H-5FH, D0H, E0H,
FFH Output:
Control Change,
Channel Press,
Pitch Bend, OFF
Parameter Assignment Value
Note Mode - OFF
Rx Channel - 1
Tx Channel - 1
Input Select - Ach:1
Bch:2
Pattern Select - 1
Transition Time CC#5 0.0sec
Superimpose OFF OFF
Transition Pattern OFF 1
Output OFF ON
Video Fader CC#11 A 100%