PRAKTICA SC1 - Manual (Page 58)

46
8. Press the Video button to start and stop video recording.
To take photos, press the Photo button.
 Note 1: To take photos using burst mode, time lapse, or
self-timer, switch to the respective mode on your camcorder and
then press the Photo button on your RF wrist strap remote
control. However, only one photo can be taken in time lapse
mode when using the RF wrist strap remote control.
 Note 2: Even if your camcorder is in Video mode, you can still
take photos by pressing the Photo button on your RF wrist strap
remote control.
 Note 3: The maximum operation distance of the remote control
is approximately 5m when the RF wrist strap remote control is
pointed at the remote control sensor of the camcorder.