Primare SPA23 av integrated amp - Manual (Page 4)

s P A 2 3 u s e r g u i d e

1 u n P A c k t h e s P A 2 3
Your SPA23 is supplied with the following
components:
• Mains cable.
• C24 remote control.
• Two button cells for the remote control.
If any of these items are missing please contact
your supplier. We recommend you retain the
packaging in case you need to transport the unit
at a later date.
2 c o n n e c t A d i s P l A y
Connect the HDMI 1 or HDMI 2 output from
your SPA23 to your television or display HDMI
input.
For more information see Video connections,
page 3.
3 c o n n e c t t o
s P e A k e r s
The SPA23 can directly drive the five loudspeakers
in a surround system. In addition it provides line-
level outputs for seven full-frequency channels and
one subwoofer.
If your surround system does not include a full set
of speakers, the SPA23 will distribute the signals
from these channels to the other channels as
appropriate in your system.
• Connect the front, centre, and surround
loudspeaker outputs to the loudspeakers in
your system.
If your system includes both side surround and
back surround speakers:
• Reassign the LEFT and RIGHT FRONT
channels to the additional surrounds,
and use the analogue FRONT LEFT and
RIGHT outputs to connect to an additional
A34.2 stereo power amplifier; see
AUDIO
SETTINGS, page 9.
If your system includes a subwoofer:
• Connect the SUB analog output to the audio
input of the subwoofer.
 c o n n e c t s o u r c e s
The SPA23 is supplied with seven standard
sources already configured; see
Selecting a source,
page 5.
Alternatively you can configure up to 15 sources
to use the particular combination of analogue,
digital, and video input you prefer; for more
information see
Input setting, page 8.
5 c o n n e c t P o W e r
• Connect the SPA23 to a wall socket, using the
supplied mains cable.
• Switch on the SPA23, using the switch next to
the power connector on the back panel.
• Press the O button to switch on the SPA23.
The button indicators will light up, showing the
function of the two controls and four buttons on
the front panel.
6 c o n f i g u r e t h e
s P e A k e r s
Before using the SPA23 you need to configure it
to specify the combination of speakers you have in
your surround system. For more information see
SPEAKER SETTING, page 10.
You then need to set up the speaker levels and
speaker distances, to ensure that the sound image
is correctly focused at the listening position. For
more information see
LEVEL ADJUST, page 10,
and SPEAKER DIST, page 11.
7 P l A y A s o u r c e
• Use the SELECTOR control on the front
panel or the A and V buttons on the remote
control to select the source.
• Use the VOLUME control on the front panel
or the VOL + and VOL – buttons on the
remote control to increase or decrease the
volume.
For more information about playing sources see
Selecting a source, page 5.
getting stArted
Set up your SPA23 in seven simple steps: