Battery installation, Hot-shoe connector with screw-lock, Operating instructions – Elinchrom 19350 User Manual

Page 5

Advertising
background image

3

Battery drawer

Battery (19372)

Minus pole on top

Flexible swivel

Antenna 360 ̊

Fig. 1

Battery Installation

1. Pull the battery drawer out carefully.

2. Place the Lithium battery, see Fig. 1 for correct polarity.

3. Close the battery drawer.
! CAUTION:
• Ensure correct polarity / minus pole on top.

• Use only the Lithium Battery CR2430 3.0 V 19372.

• Remove battery if the EL-Skyport Transmitter is not used for some time.

• Never short-circuit battery poles.

• Avoid direct sunlight or temperatures above 45°C. The battery may explode!

Hot-Shoe Connector with Screw-Lock

The new Hot-shoe connector with screw-lock and middle contact synchronisation is designed
to fit digital and analogue cameras with maximum sync output of 3 V (the middle contact is

the positive pole).

Operating Instructions

Hot-shoe with

screw lock and

SYNC socket

Advertising