Elinchrom 19350 - Manual (Page 9)

Power save mode timer:
- After not using the Transmitter for 30 minutes the Power Save mode is active. To reactivate
the Transmitter, press the TEST push button.
- The Power Save mode timer can be configured with the EL-Skyport PC / MAC software v 3.0
and higher.
Status LED:
- LED flashes every 4 seconds one time in “Standard” mode and two times in “Speed” mode.
- LED intensity correspond to the battery status - if off or very low => exchange the battery.
- LED is OFF if the Transmitter is switched OFF or in Power Save mode.
Reset to manufacturer default setting:
- Switch ON.
- Press test button for min 10 seconds.
7