Retrotec FanTestic Integrity (Venting Calculator) - Manual (Page 22)

rev-2014-10-27
Page 22 of 29
©Retrotec Inc. 2012
2.2.3 Case of Inert gas extinguishing agents with VdS and FIA:
Uses a peak mass flow rate for the calculation of pressure relief vent area, which is defaulted to a value
consistent with experiments for each agent.
2.2.4 Case of Halocarbon gas extinguishing agents with VdS:
Uses a peak mass flow rate for the calculation of pressure relief vent area, which is defaulted to a value
consistent with experiments for each agent.