RIGOL DP832A - Manual (Page 2)

DP800 Series Overview
DP800 series is high-performance programmable linear DC power supply. It is designed with clear user interface,
superb performance specifications, various analysis functions and various communication interfaces. DP800
series can fulfill versatile test requirements.
Main Features
 Three-channel/dual-channel/single-channel models available, up to 200W total output power
 Low ripples and noise: <350μVrms/2mVpp
 Excellent load regulation rate and linear regulation rate
 Fast transient response time: <50μs
 Some channels are isolated
 Provide overvoltage/overcurrent/overtemperature protection function
 Independent control for each channel
 Support serial and parallel output functions
 Some channels support the track function to track the channel voltage setting value and output on/off
status
 Provide the Sense function to automatically compensate for the voltage drop caused by the load lead in
high current output
 Provide timing output and delay output functions
 Provide built-in recorder to sample and record the channel output according to the specified record period
 Provide analyzer to analyze the recorded files and provide the analysis results of the channel voltage,
current and power
 Support monitor to monitor the output status of the instrument and the instrument will execute the
corresponding operation according to the current setting when the specified monitor condition is met
 Provide trigger and support trigger input and trigger output
 Built-in V,A,W measurements and waveform display
 3.5 inch TFT display
 Various interfaces: USB Host&Device, LAN, RS232, USB-GPIB (option), digital IO, rear panel output
interface (for DP811A/DP811)
Applications
 R&D lab general purpose test
 Quality control and assessment
 Provide pure power for RF/MW circuits or components
 Provide power for automobile electronic circuit test
 Production automation test
 Device or circuit characteristic verification and troubleshooting
 Educational experiment