ROCKINGER RO 825 B - Manual (Page 8)

ROCKI NG E R
Member of JOST-World
21
2 2.. O Op pe erra attiio on n R RO O
i i
8 82 25 5 B B
Fig. 7
2. Operation
The versions A to C differ only in terms of the bolting hole pattern.
The operation is the same in all versions. The coupling has a
bolt-locked latch.
For hitching and unhitching, the regulations of the relevant authorities
must be observed.
2.1 Hitching
No personnel may be standing between the vehicles! Risk of accident!
x Remove the locking bolt (B) (see Fig. 7).
x Lift the latch (A) and turn to the side.
x Place the towbar over the ball.
x Lower it using a suitable device.
x Turn the latch (A) to the front over the ball or towbar and slide in the
locking bolt (B) and secure it with the spring cotter (C).
2.2 Unhitching
x Secure the trailer against rolling away or extend the support feet.
x Remove the spring cotter (C) (see Fig. 7).
x Remove the locking bolt (B) (see Fig. 7).
x Pull the latch (A) upwards and turn to the side.
x Use a suitable device to lift the towbar.
x Move the tractor vehicle forwards.
GB
A
C
B
E
D