Introduction, Disclaimer, System introduction – Rose Electronics CrystalView DVI Plus User Manual

Page 7: Compatibility

Advertising
background image

INTRODUCTION

CrystalView DVI Plus Installation and Operations Manual

1

Disclaimer

While every precaution has been taken in the preparation of this manual, the
manufacturer assumes no responsibility for errors or omissions. Neither
does the manufacturer assume any liability for damages resulting from the
use of the information contained herein. The manufacturer reserves the
right to change the specifications, functions, or circuitry of the product
without notice.

The manufacturer cannot accept liability for damages due to misuse of the
product or other circumstances outside the manufacturer’s control. The
manufacturer will not be responsible for any loss, damage, or injury arising
directly or indirectly from the use of this product.

System introduction

Thank you for choosing the Rose Electronics

CrystalView

 DVI Plus Fiber

KVM station extender. The CrystalView

 DVI Plus is the KVM extender of

choice for businesses that need to extend and operate a computer, server,
or KVM switch from a great distance. The CrystalView

 DVI Plus makes

this possible by the use of multimode fiber cable. You can fully operate and
control a computer or server and your USB peripherals from as far away as
1/4 mile using 50µm multimode fiber. The CrystalView

 DVI Plus supports

all combinations of DVI-D monitors and video cards. Models are available
with USB keyboard and mouse connectors, single video or dual video, USB
2.0 support, and all models use multimode fiber.
The extenders support DVI graphical interfaces in an uncompressed mode.
The uncompressed transfer of DVI data results in a display with no picture
corruption or frame dropping at full speed. Video movements are smooth
even at the highest resolution.

The system consists of two Units, a transmitter and a receiver. The
transmitter connects to your CPUs USB connector and the DVI monitor
connector. The receiver connects to a USB keyboard, mouse, DVI video
monitor and supported USB peripherals. The transmitter and receiver are
connected together with fiber optic cable. The receiver can be up to 1,300
feet from the transmitter using 50.0µm Multimode-Fiber.

Compatibility

Video – DVI-D Singlelink (3x1.6 Gbit/sec – Max resolution 1920 x 1200)
DVI-D Duallink (6x1.6 Gbit/sec – Max resolution 2560 x 2048)
Keyboard – All standard USB keyboards / USB keyboards with built-in hub
Mouse – All standard 2, 3, and wheel mice
USB Peripherals – Compatible USB 2.0 compliant devices

Advertising