Rose Electronics CrystalLink USB 3.0 - Manual (Page 6)

6
Front View
Rear View
The RECEIVER Unit
The Receiver unit has two USB Type A ports for USB 3.0 devices. The RECEIVER unit allows you to connect up
to two USB 3.0 devices directly. The RECEIVER unit is powered by an external AC adapter and can supply up to
900mA to each USB port.
Front View
Rear View
ITEM TYPE DESCRIPTION
1 USB 3.0 Type A ports Used to connect USB 3.0 device(s) to the RECEIVER unit. Ports accept
locking or non-locking USB 3.0 Type A connectors.
2
Power ON Unit is powered properly.
Power OFF Unit is not powered or not powered properly.
3
Status Blinking (1Hz) Waiting for connection to TRANSMITTER.
Status ON TRANSMITTER/RECEIVER are linked and operating normally.
Status OFF Fault detected; power cycle required.
4
Host ON SuperSpeed Host detected on upstream facing port.
Host OFF SuperSpeed Host not detected.
5 Power Port Connects to the locking AC power supply. Required on the Receiver unit
for correct operation.
6 Config Port Reserved for manufacturer use.
7 Link Port (Dup Transmitter
LC)
Extension link Dup Transmitter LC fiber optic transceiver port.